Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2000S10/T10 P/U 2WD V6-4.3L VIN WREPAIR AND DIAGNOSISBRAKES AND TRACTION CONTROLANTILOCK BRAKES / TRACTION CONTROL SYSTEMSTESTING AND INSPECTIONSCAN TOOL TESTING AND PROCEDURESSCAN TOOL DATA DEFINITIONS
2000 Chevrolet S10/T10 P/U 2WD V6-4.3L VIN W
Scan Tool Data Definitions
2000 Chevrolet S10/T10 P/U 2WD V6-4.3L VIN WSECTION Scan Tool Data Definitions
The Data Display function contains lists of ABS data parameters. A brief description of all ABS data parameters available on the scan tool are listed below: The list is arranged in alphabetical order.
4WD Status: This display indicates if the vehicle is in 2WD or 4WD.
ABS Lamp Command: This indicates the state of the ABS indicator.
ABS Pump Motor: This display indicates the commanded state of the ABS pump motor.
ABS Stop State: This parameter indicates if the ABS is currently in an ABS event or not.
ABS Relay Command: This display indicates the actual state of the electronic brake control relay.
Brake Fluid Level Switch (325 ABS): Display shows actual status of the Brake Fluid Level Switch.
Brake Switch Status:This parameter indicates the state of the brake switch.
Brake Warning Lamp Cmd: This indicates the state of the BRAKE indicator.
Diff. Pressure Switch (310 ABS): Display shows actual status of the Differential Pressure Switch.
DRP Active: This parameter indicates if DRP is currently active.
LF Dump Valve Command: This display indicates the commanded state of the left front Dump solenoid valve.
LF Dump Valve Feedback: This display indicates the commanded state of the left front Dump solenoid valve feedback.
LF ISO Valve Command: This display indicates the commanded state of the left front Isolation solenoid valve.
LF ISO Valve Feedback: This display indicates the commanded state of the left front Isolation solenoid valve feedback.
Left Front Wheel Speed: Display shows actual wheel speed of the left front wheel.
Rear Dump Valve Command: This display indicates the commanded state of the rear Dump solenoid valve.
Rear Dump Valve Feedback: This display indicates the commanded state of the rear Dump solenoid valve feedback.
Rear ISO Valve Command: This display indicates the commanded state of the rear Isolation solenoid valve.
Rear ISO Valve Feedback: This display indicates the commanded state of the rear Isolation solenoid valve feedback.
Rear Wheel Speed: Display shows actual wheel speed of the rear wheel.
RF Dump Valve Command: This display indicates the commanded state of the right front Dump solenoid valve.
RF Dump Valve Feedback: This display indicates the commanded state of the right front Dump solenoid valve feedback.
RF ISO Valve Command: This display indicates the commanded state of the right front Isolation solenoid valve.
RF ISO Valve Feedback: This display indicates the commanded state of the right front Isolation solenoid valve feedback.
Right Front Wheel Speed: Display shows actual wheel speed of the right front wheel.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.