Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2000MALIBU V6-3.1L VIN JREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINECYLINDER BLOCK ASSEMBLYSYSTEM SPECIFICATIONSCONNECTING ROD SPECIFICATIONS
2000 Chevrolet Malibu V6-3.1L VIN J
Connecting Rod Specifications
2000 Chevrolet Malibu V6-3.1L VIN JSECTION Connecting Rod Specifications
| Connecting Rod Bearing Cap Nut | 15 -- Plus 75 degrees. |
| Connecting Rod Bearing Journal Diameter | 1.9987-1.9994 |
| Connecting Rod Bearing Journal Taper | 0.0002 |
| Connecting Rod Bearing Journal Out Of Round | 0.0002 |
| Connecting Rod Bearing Bore Diameter | 2.124-2.125 |
| Connecting Rod Inside Bearing Diameter | 2.000-2.002 |
| Connecting Rod Bearing Journal Clearance | 0.0007-0.0024 |
| Connecting Rod Side Clearance | 0.007-0.017 |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.