Wake-Up State

2000 Chevrolet K Tahoe 4WD V8-5.7L VIN RSECTION Wake-Up State
Wake-Up signals that will turn the BCM on and cause it to begin active control and/or monitoring certain devices. The BCM wake-ups are:
Door ajar switches
Door handle switches
Dome lamp
Park lamps
Power door lock switches
Interior lamp request active
Ignition key put into the ignition switch
Ignition key removed from the ignition switch
Ignition in the run position
Key in door lock switch
Liftgate release switch
Liftgate jamb switch
Remote control door lock transmitter request to the BCM
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.