Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2000C TAHOE 2WD V8-5.7L VIN RREPAIR AND DIAGNOSISWINDOWS AND GLASSWINDOWSWINDOW GLASSLIFTGATE WINDOW GLASSSERVICE AND REPAIRENDGATE WINDOW HINGE REPLACEMENT
2000 Chevrolet C Tahoe 2WD V8-5.7L VIN R
Endgate Window Hinge Replacement
2000 Chevrolet C Tahoe 2WD V8-5.7L VIN RSECTION Endgate Window Hinge Replacement
Endgate Window Hinge Replacement
Removal Procedure
1. Remove the endgate window supports.
2. Remove the hinge pin retainers and discard.
3. Remove the endgate window assembly from the vehicle.
4. Remove the endgate window garnish molding.
5. Remove the hinge (1) to the endgate window assembly nuts(2).
6. Remove the hinge from the endgate window.
Installation Procedure
1. Install the hinge (1) to the endgate window.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the hinge to the endgate window assembly nuts (2).
Tighten the hinge to the endgate window assembly nuts to 23 N.m (17 lb ft).
3. Install the endgate window garnish molding.
4. Install the endgate window assembly (3) to the vehicle.
5. Install the hinge pin.
6. Install new hinge pin retainers.
7. Install the endgate window supports.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.