Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2000C TAHOE 2WD V8-5.7L VIN RREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSBRAKES AND TRACTION CONTROLDISC BRAKE SYSTEMSYSTEM SPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2000 Chevrolet C Tahoe 2WD V8-5.7L VIN R
Fastener Tightening Specifications
2000 Chevrolet C Tahoe 2WD V8-5.7L VIN RSECTION Fastener Tightening Specifications
| Front Disc Brakes | Front Anchor Plate to Knuckle Nut | 210 ft.lb |
| Front Splash Shield Bolt | 12 ft.lb | |
| Splash Shield Mounting Bolts (C3500HD) | 13 ft.lb | |
| Splash Shield to Knuckle Bolt | 19 ft.lb | |
| Front Rotor to Hub Bolt | 175 ft.lb | |
| Rear Disc Brakes | Anchor Plate Mounting Nut | 78 ft.lb |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.