Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2000C TAHOE 2WD V8-5.7L VIN RREPAIR AND DIAGNOSISHEATING AND AIR CONDITIONINGCONTROL ASSEMBLYSERVICE AND REPAIRCONTROL ASSEMBLY REPLACEMENT - AUXILIARY (4 - DOOR)
2000 Chevrolet C Tahoe 2WD V8-5.7L VIN R
Control Assembly Replacement - Auxiliary (4 - Door)
2000 Chevrolet C Tahoe 2WD V8-5.7L VIN RSECTION Control Assembly Replacement - Auxiliary (4 - Door)
REMOVAL PROCEDURE
1. Remove the bezel.
2. Remove the control assembly from the roof panel.
3. Disconnect the electrical harness from the control assembly.
INSTALLATION PROCEDURE
1. Connect the electrical harness to the control assembly.
2. Install the control assembly to the roof panel.
3. Install the bezel.
4. Test the circuit operation.
1. Remove the bezel.
2. Remove the control assembly from the roof panel.
3. Disconnect the electrical harness from the control assembly.
INSTALLATION PROCEDURE
1. Connect the electrical harness to the control assembly.
2. Install the control assembly to the roof panel.
3. Install the bezel.
4. Test the circuit operation.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.