Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2000C TAHOE 2WD V8-5.7L VIN RREPAIR AND DIAGNOSISBODY AND FRAMELOCKSKEYLESS ENTRYKEYLESS ENTRY RECEIVERDESCRIPTION AND OPERATIONREMOTE CONTROL DOOR LOCK RECEIVER CIRCUIT
2000 Chevrolet C Tahoe 2WD V8-5.7L VIN R
Remote Control Door Lock Receiver Circuit
2000 Chevrolet C Tahoe 2WD V8-5.7L VIN RSECTION Remote Control Door Lock Receiver Circuit
The remote control door lock receiver is supplied battery voltage at all times from the PWR ACCY circuit breaker in the I/P fuse block through CKT 540 (ORN) to cavity E and also cavity F if equipped with cargo doors. If equipped with a liftgate, cavity F is powered from the CIG LTR fuse 13 through CKT 640 (ORN). The remote control door lock receiver is supplied KEY ON power from the GAUGES fuse 4 in the IP fuse block through CKT 39 (PNK) to cavity J.
The remote control door lock receiver is supplied ground from G202 through CKT 150 (BLK) to cavity N.
The remote control door lock receiver is supplied ground from G202 through CKT 150 (BLK) to cavity N.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.