Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2000C TAHOE 2WD V8-4.8L VIN VREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSSTEERINGSTEERING COLUMN
2000 Chevrolet C Tahoe 2WD V8-4.8L VIN V
Steering Column
2000 Chevrolet C Tahoe 2WD V8-4.8L VIN VSECTION Steering Column
| Horn Contact Plate Screws | 53 inch lbs. |
| Intermediate Shaft Coupler Bolt | 45 inch lbs. |
| Lower Column Cover Screws | 25 inch lbs. |
| Multifunction Turn Signal/Hazard Switch Screws | 53 inch lbs. |
| Shift Lever Screw | 16 ft. lbs. |
| Steering Column Bracket Nuts | 22 ft. lbs. |
| Steering Column Seal Nuts | 25 ft. lbs. |
| Steering Wheel Nut | 29 ft. lbs. |
| Upper Column Cover Screw | 15 inch lbs. |
| Upper to Lower Intermediate Shaft Pinch Bolt | 35 ft. lbs. |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.