Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2000C TAHOE 2WD V8-4.8L VIN VREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINESYSTEM SPECIFICATIONSINTAKE MANIFOLD SPECIFICATIONS
2000 Chevrolet C Tahoe 2WD V8-4.8L VIN V
Intake Manifold Specifications
2000 Chevrolet C Tahoe 2WD V8-4.8L VIN VSECTION Intake Manifold Specifications
| Engine Sight Shield Bolts | 89 |
| Engine Sight Shield Bracket Bolts | 45 |
| Intake Manifold Bolts (First Pass in Sequence) | 44 |
| Intake Manifold Bolts (Final Pass in Sequence) | 89 |
| Intake Manifold Wiring Harness Stud | 89 |
| Intake Manifold Cylinder Head Deck Flatness (Measured within a 200 mm (7.87 inch) Area that Includes Two Runner Port Openings) | 0.118 |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.