Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2000C TAHOE 2WD V8-4.8L VIN VREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINECYLINDER BLOCK ASSEMBLYSYSTEM SPECIFICATIONSCONNECTING ROD BEARING CLEARANCE
2000 Chevrolet C Tahoe 2WD V8-4.8L VIN V
Connecting Rod Bearing Clearance
2000 Chevrolet C Tahoe 2WD V8-4.8L VIN VSECTION Connecting Rod Bearing Clearance
| Connecting Rod Bearing Bore Diameter | 2.224 - 2.225 |
| Connecting Rod Bearing Bore Out-of-Round | 0.00015 - 0.0003 |
| Connecting Rod Bearing Clearance (Production) | 0.0006 - 0.00248 |
| Connecting Rod Bearing Clearance (Service Limit) | 0.0006 - 0.003 |
| Connecting Rod Side Clearance | 0.0043 - 0.02 |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.