Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1999LUMINA V6-3.8L VIN KREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSREAR KNUCKLE
1999 Chevrolet Lumina V6-3.8L VIN K
Rear Knuckle
1999 Chevrolet Lumina V6-3.8L VIN KSECTION Rear Knuckle
Trailing Arm to Body Nut and Bolt 95 Nm (70 ft. lbs.)
Trailing Arm to Knuckle Nut and Bolt with bolt size 16x2x90:
90 Nm plus 75 degrees (66 ft. lbs. plus 75 degrees)
Trailing Arm to Knuckle Nut and Bolt with bolt size 16x2x105:
70 Nm plus 65 degrees (52 ft. lbs. plus 65 degrees)
Rear Wheel Spindle Rod-Front and Rear to Knuckle Bolt 240 Nm (177 ft. lbs.)
Rear Wheel Spindle Rod-Front and Rear to Suspension Support Nut 150 Nm (111 ft. lbs.)
Front Wheel Hub/Bearing to Knuckle Bolts 70 Nm (52 ft. lbs.)
Trailing Arm to Knuckle Nut and Bolt with bolt size 16x2x90:
90 Nm plus 75 degrees (66 ft. lbs. plus 75 degrees)
Trailing Arm to Knuckle Nut and Bolt with bolt size 16x2x105:
70 Nm plus 65 degrees (52 ft. lbs. plus 65 degrees)
Rear Wheel Spindle Rod-Front and Rear to Knuckle Bolt 240 Nm (177 ft. lbs.)
Rear Wheel Spindle Rod-Front and Rear to Suspension Support Nut 150 Nm (111 ft. lbs.)
Front Wheel Hub/Bearing to Knuckle Bolts 70 Nm (52 ft. lbs.)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.