Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1999LUMINA V6-3.8L VIN KREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSEXHAUST SYSTEMSYSTEM SPECIFICATIONSEXHAUST SYSTEM CLEARANCES
1999 Chevrolet Lumina V6-3.8L VIN K
Exhaust System Clearances
1999 Chevrolet Lumina V6-3.8L VIN KSECTION Exhaust System Clearances
Exhaust System to the Body and the Heat Shields in an Unloaded Vehicle 25.4 mm 1 inch
Exhaust System to the Ground at the Gross Vehicle Weight 120 mm 4.74 inch
Exhaust System to the Power Steering Heat Shield 25.4 mm 1 inch
Tail Pipe to the Rear Fascia Clearance 25.4 mm 1 inch
Three Way Catalytic Converter Clearance to the Ground 120 mm 4.74 inch
Exhaust System to the Ground at the Gross Vehicle Weight 120 mm 4.74 inch
Exhaust System to the Power Steering Heat Shield 25.4 mm 1 inch
Tail Pipe to the Rear Fascia Clearance 25.4 mm 1 inch
Three Way Catalytic Converter Clearance to the Ground 120 mm 4.74 inch
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.