Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1999LUMINA V6-3.8L VIN KREPAIR AND DIAGNOSISPOWERTRAIN MANAGEMENTCOMPUTERS AND CONTROL SYSTEMSTESTING AND INSPECTIONSCAN TOOL TESTING AND PROCEDURESSCAN TOOL DATA, NORMAL VALUES AND DEFINITIONSSCAN TOOL DATA DEFINITIONS - POWERTRAIN SYSTEMSSPARK
1999 Chevrolet Lumina V6-3.8L VIN K
Spark
1999 Chevrolet Lumina V6-3.8L VIN KSECTION Spark
Scan Tool Range -64 degrees to 64 degrees. Displays the spark timing being commanded by the PCM on the IC circuit. A negative (-) value indicates degrees Before Top Dead Center (BTDC) or spark advance; a positive value indicates degrees After Top Dead Center (ATDC) or spark retard. Because the ignition control module sets spark advance at a fixed value of 100 BTDC while operating in Bypass mode, the displayed Spark advance only reflects true spark timing when the PCM has commanded IC mode.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.