OFF-ON-R/A Switch

OFF-ON-R/A Switch:

The OFF-ON-R/A switch has the following 3 positions:
^ The ON position
The ON position turns the cruise control system ON.
^ The OFF position
The OFF position turns the cruise control system OFF.
^ The R/A position
The R/A switch position has the following 3 main functions:
- Resume
The system will enter the resume mode when the OFF-ON-R/A switch is held in the R/A (Resume/Accelerate) position momentarily. The vehicle speed must exceed 40 km/h (25 mph) at the time of activation in order for the cruise control operation to return to the last cruise speed setting.
- Accelerate
The system will enter the accelerate mode when the OFF-ON-R/A switch is held in the R/A position for more than one second.
To increase the cruise speed, the vehicle must be traveling at least 40 km/h (25 mph) and the ON-OFF-R/A switch held in the R/A position until the vehicle reaches the desired cruise speed.
The system will maintain the new cruise speed when the OFF-ON-R/A switch is released to the ON position.
- Tap-Up
This function increases the cruise speed by increments of 2 km/h (1 mph). One tap equals a 2 km/h (1 mph) increase. The cruise must be engaged and operating in order to use this function.
Press the OFF-ON-R/A switch toward the R/A position and release quickly or tap the lever in order to operate the tap-up function. Do not hold the lever in the R/A position or the system will go into the accelerate mode.