Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1999LUMINA V6-3.8L VIN KREPAIR AND DIAGNOSISBRAKES AND TRACTION CONTROLDISC BRAKE SYSTEMSPECIFICATIONS
1999 Chevrolet Lumina V6-3.8L VIN K
Disc Brake System: Specifications
1999 Chevrolet Lumina V6-3.8L VIN KSECTION Specifications
Discard Diameter 226.57 mm (8.920 inch)
Inside Diameter 225.12 mm (8.863 inch)
Maximum Lateral Runout 0.15 mm (0.006 inch)
Maximum Rebore Diameter 226.30 mm (8.909 inch)
Wheel Cylinder Bore Diameter 22.20 mm (0.874 inch)
Inside Diameter 225.12 mm (8.863 inch)
Maximum Lateral Runout 0.15 mm (0.006 inch)
Maximum Rebore Diameter 226.30 mm (8.909 inch)
Wheel Cylinder Bore Diameter 22.20 mm (0.874 inch)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.