Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1999ASTRO VAN 2WD V6-4.3L VIN WREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSBATTERY
1999 Chevrolet Astro Van 2WD V6-4.3L VIN W
Battery
1999 Chevrolet Astro Van 2WD V6-4.3L VIN WSECTION Battery
| Battery Negative Cable to Engine Stud | 40 Newton Meter (Nm) |
| Battery Negative Cable Terminal Bolt | 15 Newton Meter (Nm) |
| Battery Positive Cable Terminal Bolt | 15 Newton Meter (Nm) |
| Battery Positive Cable to Starter Motor Nut | 9 Newton Meter (Nm) |
| Battery Positive Cable to Underhood Electrical Center Nut | 9 Newton Meter (Nm) |
| Battery Retainer Hold Down Bolt | 23 Newton Meter (Nm) |
| Battery Tray Bolts | 25 Newton Meter (Nm) |
| Engine Harness to Battery Negative Cable Nut | 25 Newton Meter (Nm) |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.