Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1999ASTRO VAN 2WD V6-4.3L VIN WREPAIR AND DIAGNOSISPOWERTRAIN MANAGEMENTCOMPUTERS AND CONTROL SYSTEMSTESTING AND INSPECTIONSCAN TOOL TESTING AND PROCEDURESSCAN TOOL DATA, NORMAL VALUES AND DEFINITIONSSCAN TOOL DATA DEFINITIONS - POWERTRAIN SYSTEMSIGNITION 1 HIGH
1999 Chevrolet Astro Van 2WD V6-4.3L VIN W
Ignition 1 High
1999 Chevrolet Astro Van 2WD V6-4.3L VIN WSECTION Ignition 1 High
YES/NO
The scan tool indicates when high ignition voltage has been detected by the VCM. An excessively high ignition 1 voltage could damage electronics and electrical components. The normal ignition 1 voltage is approximately 13.8 volts, but may vary between 11-16 volts.
The scan tool indicates when high ignition voltage has been detected by the VCM. An excessively high ignition 1 voltage could damage electronics and electrical components. The normal ignition 1 voltage is approximately 13.8 volts, but may vary between 11-16 volts.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.