Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1998METRO L4-079 1.3L VIN 2 MFIREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSCONTROL ARM
1998 Chevrolet Metro L4-079 1.3L VIN 2 MFI
Control Arm
1998 Chevrolet Metro L4-079 1.3L VIN 2 MFISECTION Control Arm
Front Suspension
Front Control Arm Bracket Nut 125 Nm (92 ft. lbs.)
Control Arm Bracket Bolt:
Front 90 Nm (66 ft. lbs.)
Rear 43 Nm (32 ft. lbs.)
Control Arm Nut 28 Nm (20 ft. lbs.)
Rear Suspension
Suspension Arm:
Front Mounting Bracket Bolts 45 Nm (33 ft. lbs.)
To Knuckle Nut And Bolt 40 Nm (29 ft. lbs.)
Rear Through Bolt And Nut 40 Nm (29 ft. lbs.)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.