Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1998LUMINA V6-3.8L VIN KREPAIR AND DIAGNOSISWINDOWS AND GLASSWINDOWSPOWER WINDOW SWITCHSERVICE AND REPAIRTRIM PANEL APPLIQUE
1998 Chevrolet Lumina V6-3.8L VIN K
Trim Panel Applique
1998 Chevrolet Lumina V6-3.8L VIN KSECTION Trim Panel Applique
TRIM PANEL APPLIQUE
Coupe and Sedan
REMOVAL PROCEDURE
Remove the applique (1) from the front door inner trim panel by unsnapping the clips (2).
INSTALLATION PROCEDURE
1. Align the locating pins (2) on applique to the front door inner trim panel.
2. Apply firm pressure to secure the applique to the front door inner trim panel.
Coupe and Sedan
REMOVAL PROCEDURE
Remove the applique (1) from the front door inner trim panel by unsnapping the clips (2).
INSTALLATION PROCEDURE
1. Align the locating pins (2) on applique to the front door inner trim panel.
2. Apply firm pressure to secure the applique to the front door inner trim panel.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.