Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1998EXPRESS 1 TON VAN V8-5.7L VIN RREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSSTARTER MOTOR
1998 Chevrolet Express 1 Ton Van V8-5.7L VIN R
Starter Motor
1998 Chevrolet Express 1 Ton Van V8-5.7L VIN RSECTION Starter Motor
Starter Motor Bracket Bolt to the Engine (Diesel Engines) 17 N.m (13 lb ft)
Starter Motor Retaining Bolts to the Engine 45 N.m (33 lb ft)
Starter Motor Heat Shield Retaining Bolts 3 N.m (27 lb in)
Starter Motor Heat Shield Retaining Nuts 6 N.m (53 lb in)
Starter Motor Retaining Nut to the Engine Bracket (Diesel Engines) 10 N.m (89 lb in)
Starter Motor Field Lead Retaining Nut 11 N.m (97 lb in)
Starter Motor Solenoid Clamp Retaining Screws 11 N.m (97 lb in)
Starter Motor Solenoid Retaining Bolts 9 N.m (80 lb in)
Starter Motor Brush Plate Retaining Screws 28 MT 3 N.m (27 lb in)
Starter Motor Drive Housing Retaining Bolts 28 MT 9 N.m (80 lb in)
Starter Motor Grounded Brush Retaining Screws 28 MT 2 N.m (18 lb in)
Starter Motor Insulated Brush Retaining Screws 28 MT 2 N.m (18 lb in)
Starter Motor Shift Lever Retaining Nut 28 MT 5 N.m (44 lb in)
Starter Motor Retaining Bolts to the Engine 45 N.m (33 lb ft)
Starter Motor Heat Shield Retaining Bolts 3 N.m (27 lb in)
Starter Motor Heat Shield Retaining Nuts 6 N.m (53 lb in)
Starter Motor Retaining Nut to the Engine Bracket (Diesel Engines) 10 N.m (89 lb in)
Starter Motor Field Lead Retaining Nut 11 N.m (97 lb in)
Starter Motor Solenoid Clamp Retaining Screws 11 N.m (97 lb in)
Starter Motor Solenoid Retaining Bolts 9 N.m (80 lb in)
Starter Motor Brush Plate Retaining Screws 28 MT 3 N.m (27 lb in)
Starter Motor Drive Housing Retaining Bolts 28 MT 9 N.m (80 lb in)
Starter Motor Grounded Brush Retaining Screws 28 MT 2 N.m (18 lb in)
Starter Motor Insulated Brush Retaining Screws 28 MT 2 N.m (18 lb in)
Starter Motor Shift Lever Retaining Nut 28 MT 5 N.m (44 lb in)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.