Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1998EXPRESS 1 TON VAN V8-5.7L VIN RREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSCONTROL ARM
1998 Chevrolet Express 1 Ton Van V8-5.7L VIN R
Control Arm
1998 Chevrolet Express 1 Ton Van V8-5.7L VIN RSECTION Control Arm
Jounce Bumper Assembly To Lower Control Arm 25 Nm (18 ft. lbs.)
Lower Control Arm Pivot Bolts 155 Nm (115 ft. lbs.)
Upper Control Arm To The Frame Nuts 190 Nm (140 ft. lbs.)
Lower Control Arm Pivot Bolts 155 Nm (115 ft. lbs.)
Upper Control Arm To The Frame Nuts 190 Nm (140 ft. lbs.)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.