Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1998EXPRESS 1 TON VAN V8-5.7L VIN RREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSALIGNMENTALIGNMENT SPECIFICATIONS
1998 Chevrolet Express 1 Ton Van V8-5.7L VIN R
Alignment Specifications
1998 Chevrolet Express 1 Ton Van V8-5.7L VIN RSECTION Alignment Specifications
Wheel Alignment Specifications
Caster:
Service Allowable 3.75° +/- 2.0°
Service Preferred 3.75° +/- 1.0°
Side-to-Side Tolerance 0.5°
Camber:
Service Allowable 0.5° +/- 1.0°
Service Preferred 0.5° +/- 0.5°
Side-to-Side Tolerance 0.5°
Toe:
Service Allowable 0.24° +/- 0.20°
Service Preferred 0.24°
Service Preferred Toe-in equally
Caster:
Service Allowable 3.75° +/- 2.0°
Service Preferred 3.75° +/- 1.0°
Side-to-Side Tolerance 0.5°
Camber:
Service Allowable 0.5° +/- 1.0°
Service Preferred 0.5° +/- 0.5°
Side-to-Side Tolerance 0.5°
Toe:
Service Allowable 0.24° +/- 0.20°
Service Preferred 0.24°
Service Preferred Toe-in equally
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.