Heater Core

1998 Chevrolet Astro Van 2WD V6-4.3L VIN WSECTION Heater Core
Auxiliary Heater Inlet/Outlet Front Pipe Assembly Clip To Frame Bolt 30 Inch Pound-Force (in.lb)
Auxiliary Heater Module To Floor Bolts 44 Inch Pound-Force (in.lb)
Heater Assembly To Blower Assembly Bolts 53 Inch Pound-Force (in.lb)
Heater Assembly To Blower Assembly Nuts 66 Inch Pound-Force (in.lb)
Heater Inlet/Outlet Hose Clip To Heater Assembly 35 Inch Pound-Force (in.lb)
Hot Water Bypass Valves To Blower Assembly Bolts 35 Inch Pound-Force (in.lb)
Vent Valve Assembly To Cowl Side Panel Bolts 35 Inch Pound-Force (in.lb)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.