Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1997ASTRO VAN 2WD V6-4.3L VIN WREPAIR AND DIAGNOSISWIPER AND WASHER SYSTEMSWINDSHIELD WASHER CONTROL MODULESERVICE AND REPAIR
1997 Chevrolet Astro Van 2WD V6-4.3L VIN W
Windshield Washer Control Module: Service and Repair
1997 Chevrolet Astro Van 2WD V6-4.3L VIN WSECTION Service and Repair
Description:
Remove or Disconnect
1. Negative battery cable.
2. Liftgate garnish molding.
3. Two electrical connectors from controller assembly.
4. Two rivets and controller assembly from liftgate.
^ Drill the heads from the rivets using an appropriate drill bit.
Install or Connect
1. Controller assembly on liftgate with two rivets using a hand-held rivet gun.
2. Two electrical connectors to controller assembly.
3. Liftgate garnish molding.
4. Negative battery cable.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.