Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1997ASTRO VAN 2WD V6-4.3L VIN WREPAIR AND DIAGNOSISRELAYS AND MODULESRELAYS AND MODULES - POWERTRAIN MANAGEMENTRELAYS AND MODULES - COMPUTERS AND CONTROL SYSTEMSENGINE CONTROL MODULETESTING AND INSPECTION
1997 Chevrolet Astro Van 2WD V6-4.3L VIN W
Engine Control Module: Testing and Inspection
1997 Chevrolet Astro Van 2WD V6-4.3L VIN WSECTION Testing and Inspection
VEHICLE CONTROL MODULE DIAGNOSIS
General Description
The VCM is located on the right hand side fenderwell. The VCM is the control center for the fuel emissions automatic transmission control functions and the anti lock brakes systems.
The VCM constantly monitors the information from the various sensors. The VCM controls the component systems which affect the engine, the transmission, and the anti lock operation.
The VCM alerts the driver through the Malfunction Indicator Lamp (MIL) or the antilock indicator lamp. The VCM stores the DTCs which identify the problem areas for the technician making repairs.
The VCM in this vehicle is programmable. The only services allowed on the VCM is the control module replacement with the KS calibrator PROM transferred or the KS calibrator PROM only.
The KS calibrator contains the up integrated knock sensor calibration. The VCM stores the 4 calibrations in the Electronically Erasable Programmable Read Only Memory (EEPROM).
When replacing the VCM, programming the EEPROM and transferring the KS calibrator PROM to the new VCM is mandatory.
The 4 calibrations required for the VCM are the Powertrain, the ABS, the VSS buffer, and the A/C. Each calibration has its own part number. Determine the correct calibrations for a particular vehicle based on the VIN number of the vehicle.
General Description
The VCM is located on the right hand side fenderwell. The VCM is the control center for the fuel emissions automatic transmission control functions and the anti lock brakes systems.
The VCM constantly monitors the information from the various sensors. The VCM controls the component systems which affect the engine, the transmission, and the anti lock operation.
The VCM alerts the driver through the Malfunction Indicator Lamp (MIL) or the antilock indicator lamp. The VCM stores the DTCs which identify the problem areas for the technician making repairs.
The VCM in this vehicle is programmable. The only services allowed on the VCM is the control module replacement with the KS calibrator PROM transferred or the KS calibrator PROM only.
The KS calibrator contains the up integrated knock sensor calibration. The VCM stores the 4 calibrations in the Electronically Erasable Programmable Read Only Memory (EEPROM).
When replacing the VCM, programming the EEPROM and transferring the KS calibrator PROM to the new VCM is mandatory.
The 4 calibrations required for the VCM are the Powertrain, the ABS, the VSS buffer, and the A/C. Each calibration has its own part number. Determine the correct calibrations for a particular vehicle based on the VIN number of the vehicle.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.