Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1996G 30 VAN V8-5.7L VIN RREPAIR AND DIAGNOSISMAINTENANCEALIGNMENTSERVICE AND REPAIRPRELIMINARY INSPECTION
1996 Chevrolet G 30 Van V8-5.7L VIN R
Preliminary Inspection
1996 Chevrolet G 30 Van V8-5.7L VIN RSECTION Preliminary Inspection
Inspect the following components, adjust, repair or replace as required prior to performing front wheel alignment.
1. Inflate tires to cold specifications.
2. Ensure front tires are of same size, ply rating and load rating.
3. Inspect for excessive wheel bearing endplay.
4. Inspect for worn or damaged spindle ball joints.
5. Inspect steering gear mounting bolts for proper tightness.
6. Inspect radius arm or bent or damaged condition.
7. Inspect radius arm to frame bushings for looseness or wear.
8. Inspect suspension components for wear or damage.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.