Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1995S10/T10 P/U 2WD L4-2.2L VIN 4REPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINESYSTEM SPECIFICATIONSENGINE CONFIGURATION SPECIFICATIONS
1995 Chevrolet S10/T10 P/U 2WD L4-2.2L VIN 4
Engine Configuration Specifications
1995 Chevrolet S10/T10 P/U 2WD L4-2.2L VIN 4SECTION Engine Configuration Specifications
Engine
Liter/CID 2.2L/L4-134
VIN Code [02] 4
Fuel System MFI
Bore & Stroke 3.50 x 3.46
Compression Ratio 9
Net H.P. @ RPM 118 @ 5200
Maximum Torque, Ft. Lbs. @ RPM 130 @ 2800
Normal Oil Pressure, Psi [06] 56
[02] Eighth digit denotes engine code.
[06] At 3000 RPM.
Liter/CID 2.2L/L4-134
VIN Code [02] 4
Fuel System MFI
Bore & Stroke 3.50 x 3.46
Compression Ratio 9
Net H.P. @ RPM 118 @ 5200
Maximum Torque, Ft. Lbs. @ RPM 130 @ 2800
Normal Oil Pressure, Psi [06] 56
[02] Eighth digit denotes engine code.
[06] At 3000 RPM.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.