Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1995BERETTA L4-2.2L VIN 4REPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINECYLINDER HEAD ASSEMBLYSYSTEM SPECIFICATIONSDIMENSIONS
1995 Chevrolet Beretta L4-2.2L VIN 4
Dimensions
1995 Chevrolet Beretta L4-2.2L VIN 4SECTION Dimensions
Engine Liter/VIN 2.2L/4
All Measurements Given In Inches Unless Otherwise Specified
Cylinder Head Warpage Limit [02]
Valve Guides
Stem To Guide Clearance
Intake 0.0010-0.0027
Exhaust 0.0014-0.0031
Valve Seats
Seat Angle 46deg.
Seat Width
Intake 0.0490-0.0590
Exhaust 0.0630-0.0750
Runout 0.002
[02] Maximum surface refinish, 0.010 inch.
All Measurements Given In Inches Unless Otherwise Specified
Cylinder Head Warpage Limit [02]
Valve Guides
Stem To Guide Clearance
Intake 0.0010-0.0027
Exhaust 0.0014-0.0031
Valve Seats
Seat Angle 46deg.
Seat Width
Intake 0.0490-0.0590
Exhaust 0.0630-0.0750
Runout 0.002
[02] Maximum surface refinish, 0.010 inch.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.