SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1995BERETTA L4-2.2L VIN 4REPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINECYLINDER BLOCK ASSEMBLYPISTON RING, ENGINE
1995 Chevrolet Beretta L4-2.2L VIN 4

Piston Ring, Engine

1995 Chevrolet Beretta L4-2.2L VIN 4SECTION Piston Ring, Engine
Engine Liter/VIN 2.2L/4

All Measurements Given In Inches Unless Otherwise Specified

Piston Clearance 0.0007-0.0017
Piston Pin Diameter [01] 0.8000-0.8002
Piston Pin To Piston Clearance 0.0004-0.0009
Piston Ring End Gap [02]
Comp. 0.010-0.020
Oil 0.0100-0.0500
Piston Ring Side Clearance
Comp. 0.0019-0.0027
Oil 0.0019-0.0082

[01] Pistons & pins are matched set & should be replaced as an assembly.
[02] Maximum.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.