Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1995BERETTA L4-2.2L VIN 4REPAIR AND DIAGNOSISHEATING AND AIR CONDITIONINGCOMPRESSOR HVACSERVICE AND REPAIRCOMPRESSOR REPLACEMENT
1995 Chevrolet Beretta L4-2.2L VIN 4
Compressor Replacement
1995 Chevrolet Beretta L4-2.2L VIN 4SECTION Compressor Replacement
Compressor:
REMOVE OR DISCONNECT
1. Recover refrigerant from A/C system.
2. Serpentine drive belt.
3. Raise vehicle.
4. Right splash shield.
5. Electrical connector at compressor clutch.
6. Bolt attaching A/C compressor and condenser hose to rear of compressor.
7. Compressor attaching bolts and compressor.
NOTICE: If replacing compressor, refer to Refrigerant Oil Distribution. Specifications
INSTALL OR CONNECT
1. Compressor into position and front bolts.
2. Rear bolts(s).
3. Compressor and condenser hose and bolt.
4. Electrical connector to clutch coil.
5. Right splash shield.
6. Lower vehicle.
7. Serpentine drive belt.
8. Evacuate, charge and leak test A/C system.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.