Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1994LUMINA V6-204 3.4L DOHCREPAIR AND DIAGNOSISMAINTENANCEALIGNMENTSPECIFICATIONSALIGNMENT SPECIFICATIONSREAR ALIGNMENT SPECIFICATIONS
1994 Chevrolet Lumina V6-204 3.4L DOHC
Rear Alignment Specifications
1994 Chevrolet Lumina V6-204 3.4L DOHCSECTION Rear Alignment Specifications
Camber Angle, Degrees
Limits -.4 to +.6
Desired +0.1
Total Toe, Degrees -0.1
Thrust Angle, Degrees
Limits -.15 to +.15
Desired 0
[01] Vehicles w/ 15 inch wheels, -3.0 ° to -4.0 °; desired angle -3.5 °. Vehicles w/ 16 inch wheels, -.40 ° to -.50 °; desired angle -.45 °.
[02] Vehicles w/ 15 inch wheels, -1.4 ° to -.40 °; desired angle -.90 °. Vehicles w/ 16 inch wheels, -1.5 ° to -.50 °; desired angle -1.0 °.
Limits -.4 to +.6
Desired +0.1
Total Toe, Degrees -0.1
Thrust Angle, Degrees
Limits -.15 to +.15
Desired 0
[01] Vehicles w/ 15 inch wheels, -3.0 ° to -4.0 °; desired angle -3.5 °. Vehicles w/ 16 inch wheels, -.40 ° to -.50 °; desired angle -.45 °.
[02] Vehicles w/ 15 inch wheels, -1.4 ° to -.40 °; desired angle -.90 °. Vehicles w/ 16 inch wheels, -1.5 ° to -.50 °; desired angle -1.0 °.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.