Preliminary Inspection

1994 Chevrolet Lumina V6-204 3.4L DOHCSECTION Preliminary Inspection
1. Ensure tires are inflated to correct pressure, and check for uneven wear.
2. Check front wheel bearings and related suspension components for damage and replace as necessary, to eliminate improper alignment due to faulty components.
3. Check ball joints and tie rods.
4. Check vehicle trim heights.
5. Check steering gear for looseness at frame.
6. Check struts for improper operation.
7. Check for loose control arms.
8. Check for loose or missing stabilizer shaft attachments.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.