Engine Configuration Specifications

1994 Chevrolet C 2500 Suburban 2WD V8-454 7.4LSECTION Engine Configuration Specifications
Engine VIN Code N
Engine 7.4L/V8-454
Fuel System TBI
Bore & Stroke, Inch 4.25 x 4.00
Compression Ratio 7.9
Horsepower @ RPM [11]
Torque, Ft. Lbs. @ RPM [12]
Normal Oil Pressure, psi [05]


TBI Throttle Body Injection.
[05] 10 psi @ 500 RPM minimum; 40-60 psi @ 2000 RPM.
[11] Except SS engine, 230 @ 3600 RPM; SS engine, 255 @ 4000 RPM.
[12] Except SS engine, 385 @ 1600 RPM; SS engine, 405 @ 2400 RPM.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.