Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1994C 2500 SUBURBAN 2WD V8-454 7.4LREPAIR AND DIAGNOSISCRUISE CONTROLCRUISE CONTROL SERVO CABLEADJUSTMENTS
1994 Chevrolet C 2500 Suburban 2WD V8-454 7.4L
Cruise Control Servo Cable: Adjustments
1994 Chevrolet C 2500 Suburban 2WD V8-454 7.4LSECTION Adjustments
Fig. 19 Unlocking cable conduit:
1. Unlock the cable conduit engine fitting, Fig. 19.
2. Move cable conduit until throttle plate begins to open.
3. From this position, move conduit in the opposite direction enough to close the throttle plate.
4. Do not release cable, until the cable conduit lock is in place.
Fig. 18 Locking cable conduit:
5. While holding the cable conduit, firmly push down on the cable conduit until it snaps in place, Fig. 18.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.