Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1994C 2500 SUBURBAN 2WD V8-350 5.7LREPAIR AND DIAGNOSISMAINTENANCEALIGNMENTSPECIFICATIONSVEHICLE RIDE (TRIM) HEIGHT SPECIFICATIONS
1994 Chevrolet C 2500 Suburban 2WD V8-350 5.7L
Vehicle Ride (Trim) Height Specifications
1994 Chevrolet C 2500 Suburban 2WD V8-350 5.7LSECTION Vehicle Ride (Trim) Height Specifications
Vehicle Ride Height Location & Specifications:
"Z" HEIGHT
1. Lift front bumper of vehicle up approximately 1.5 inches.
2. Gently remove hands and allow vehicle to settle on its own.
3. Repeat this operation twice more for a total of three times.
4. Measure "Z" height, Fig. 1.
5. Push front bumper on vehicle down approximately 1.5 inches.
6. Gently remove hands and allow vehicle to rise on its own.
7. Repeat this operation twice more for a total of three times.
8. Measure "Z" height.
9. Find the average of the high and low measurements. This is the "Z" height. "Z" height should be 3.74 inches.
"D" HEIGHT
Use the same procedure used in determining the "Z" height. "D" height should be 7.17 inches.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.