Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1993LUMINA APV V6-3800 3.8LREPAIR AND DIAGNOSISTRANSMISSION AND DRIVETRAINAUTOMATIC TRANSMISSION/TRANSAXLESERVICE AND REPAIRPROCEDURESSHIFT CONTROL CABLE ADJUST
1993 Chevrolet Lumina APV V6-3800 3.8L
Shift Control Cable Adjust
1993 Chevrolet Lumina APV V6-3800 3.8LSECTION Shift Control Cable Adjust
1. Lift up cable lock button, located near transaxle cable bracket.
2. Place transaxle manual control lever in Neutral position. Neutral position can be obtained by rotating the manual lever counterclockwise to Park position, then rotate lever clockwise from Park through Reverse to Neutral.
3. Place transaxle selector lever in Neutral position.
4. Push down on cable lock button.
2. Place transaxle manual control lever in Neutral position. Neutral position can be obtained by rotating the manual lever counterclockwise to Park position, then rotate lever clockwise from Park through Reverse to Neutral.
3. Place transaxle selector lever in Neutral position.
4. Push down on cable lock button.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.