Initial Inspection and Diagnostic Overview

1993 Chevrolet Lumina APV V6-3800 3.8LSECTION Initial Inspection and Diagnostic Overview
PERFORM THESE STEPS FIRST

^ Check IGN Fuse and G200 by noting normal operation of the Blower Motor.

^ Check for a broken (or partially broken) wire inside of the insulation which could cause system failure but prove "GOOD" in a continuity/voltage check.

^ Check for proper installation of aftermarket electronic equipment which may affect the integrity of other systems.


RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.