Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1993CAPRICE WAGON RWD V8-350 5.7LREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINEOIL PUMP, ENGINEDIMENSION/CLEARANCE SPECIFICATIONS
1993 Chevrolet Caprice Wagon RWD V8-350 5.7L
Dimension/Clearance Specifications
1993 Chevrolet Caprice Wagon RWD V8-350 5.7LSECTION Dimension/Clearance Specifications
Vin 7,8,P & J Gear Dimensions
| Gear Backlash | - Note: Pump components are not serviced separately. If any component is damaged or worn, pump should be replaced. |
| Gear To Body Clearance | - Note: Pump components are not serviced separately. If any component is damaged or worn, pump should be replaced. |
| Gear Endplay Note: Measured between pump cover & end of gears using straight edge & feeler gauge. | - Note: Pump components are not serviced separately. If any component is damaged or worn, pump should be replaced. |
| Gear Pocket Depth | - Note: Pump components are not serviced separately. If any component is damaged or worn, pump should be replaced. |
| Diameter | - Note: Pump components are not serviced separately. If any component is damaged or worn, pump should be replaced. |
| Pump Gear Thickness | - Note: Pump components are not serviced separately. If any component is damaged or worn, pump should be replaced. |
| Pump Gear Diameter | - Note: Pump components are not serviced separately. If any component is damaged or worn, pump should be replaced. |
| Relief Valve To Body Clearance | - Note: Pump components are not serviced separately. If any component is damaged or worn, pump should be replaced. |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.