Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1993CAPRICE WAGON RWD V8-350 5.7LREPAIR AND DIAGNOSISPOWERTRAIN MANAGEMENTCOMPUTERS AND CONTROL SYSTEMSELECTRONIC SPARK CONTROL MODULEDESCRIPTION AND OPERATION
1993 Chevrolet Caprice Wagon RWD V8-350 5.7L
Electronic Spark Control Module: Description and Operation
1993 Chevrolet Caprice Wagon RWD V8-350 5.7LSECTION Description and Operation
Wiring Diagram For ESC Circuit:
Electronic Spark Control (ESC) is accomplished with a module that sends a voltage signal to the ECM. As the sensor detects engine knock, the voltage from the ESC module to the ECM is reduced. This signals the ECM to retard the timing, if engine speed is over approximately 900 rpm.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.