Cruise Control Servo Cable: Adjustments

1993 Chevrolet Caprice Wagon RWD V8-350 5.7LSECTION Adjustments
1. Remove air cleaner and resonator.

2. Unlock cable conduit at support bracket

3. With throttle closed, lock cable conduit by pressing down on lock tab.

4. When cable is in unlocked position and throttle is closed, cable adjustment spring removes appropriate amount of slack

5. Lock button must be fully extended to allow proper adjustment spring operation prior to locking

6. Install air cleaner and resonator.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.