Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1992LUMINA V6-204 3.4L DOHCREPAIR AND DIAGNOSISPOWERTRAIN MANAGEMENTCOMPUTERS AND CONTROL SYSTEMSTHROTTLE POSITION SENSORADJUSTMENTS
1992 Chevrolet Lumina V6-204 3.4L DOHC
Throttle Position Sensor: Adjustments
1992 Chevrolet Lumina V6-204 3.4L DOHCSECTION Adjustments
TPS Adjustment Check:
The throttle position sensor is not adjustable. The normal closed throttle position voltage is between 0.29 and 0.98 volts, and normal wide open throttle position voltage is approximately 5.0 volts. If these limits are not in specification, check for freedom of throttle movement, and accelerator pedal interference from carpets and other obstructions. If the problem is not corrected, replace the TPS.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.