Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1992LUMINA APV V6-3800 3.8LREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINECYLINDER BLOCK ASSEMBLYCONNECTING ROD, ENGINECONNECTING ROD/BEARING DIMENSIONS
1992 Chevrolet Lumina APV V6-3800 3.8L
Connecting Rod/Bearing Dimensions
1992 Chevrolet Lumina APV V6-3800 3.8LSECTION Connecting Rod/Bearing Dimensions
Diameter 57.117-57.147 mm (2.2487-2.2499 in.)
Taper Max 0.0008 mm (0.0003 in.)
Runout Max 0.0008 mm (0.0003 in.)
Bearing to Journal Clearance 0.020 mm-0.055 mm (0.00080.0022 in.)
Rod Side Clearance 0.076-0.381 mm (0.003-0.015 in.)
Connecting Rod Large End Bore ID 60.295-60.312 mm (2.3738-2.3745 in.)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.