Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1992CAPRICE WAGON RWD V8-305 5.0LREPAIR AND DIAGNOSISRELAYS AND MODULESRELAYS AND MODULES - BODY AND FRAMEKEYLESS ENTRY MODULETECHNICAL SERVICE BULLETINSKEYLESS ENTRY - RECEIVER MODULE INFORMATION
1992 Chevrolet Caprice Wagon RWD V8-305 5.0L
Keyless Entry - Receiver Module Information
1992 Chevrolet Caprice Wagon RWD V8-305 5.0LSECTION Keyless Entry - Receiver Module Information
91chevy27
Number: 92-25-10
Section: 10
Date: OCT. 1991
Corporate Bulletin No.: 138117
ASE No.: B1
Subject: KEYLESS ENTRY INFORMATION
Model and Year: 1992 CAPRICE
Some 1992 B Cars built early in the year were built with a keyless entry (option AU0) receiver module which was not properly wired. The module is located under the rear package shelf, between the rear speakers. All cars built with this condition had the option removed from the invoice before shipment from the assembly plant, and were shipped without the transmitter.
If a transmitter from Parts is used in an attempt to use the keyless entry feature, the trunk release function will not work. NO ATTEMPT SHOULD BE MADE TO CORRECT THESE VEHICLES.
The receiver module MUST be left in the vehicle for the normal power door locks to work properly. DO NOT REMOVE THE RECEIVER.
Vehicles after the following VIN's are built properly:
Willow Run: NW103483 (NW100922 and NW101562 are also correct)
Arlington: NR101011
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.