Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1992CAMARO V8-305 5.0L VIN EREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINESYSTEM SPECIFICATIONSFASTENER TORQUE SPECIFICATIONS
1992 Chevrolet Camaro V8-305 5.0L VIN E
Fastener Torque Specifications
1992 Chevrolet Camaro V8-305 5.0L VIN ESECTION Fastener Torque Specifications
Fastener Torque Specifications
Rear Transmission Mount Bolt 54 Nm (40 lb ft.)
Rear Transmission Mount Nut 47 Nm (35 lb. ft.)
Engine Mount Through Bolt 68 Nm (50 lb. ft.)
Engine Mount Nut 41 Nm (30 lb. ft.)
Engine Bracket Bolt 52 Nm (38 lb. ft.)
Intake Manifold Bolt and Stud (Interim) 10 Nm (89 lb. in.)
Intake Manifold Bolt and Stud (Final) 47 Nm (35 lb. ft.)
Exhaust Manifold Bolt and Stud (Center) 37 Nm (20 lb. ft.)
Exhaust Manifold Bolt and Stud (Outer) 35 Nm (26 lb. ft.)
Engine Front Cover Bolt 11 Nm (97 lb. in.)
Camshaft Sprocket-to-Camshaft Bolt 28 Nm (21 lb. ft.)
Cylinder Head Bolt 92 Nm (68 lb. ft.)
Oil Pan-to-Cylinder Block Bolt 11 Nm (97 lb. in.)
Oil Pan-to-Cylinder Block Nut 23 Nm (17 lb. ft.)
Oil Pump-to-Rear Main Bearing Cap Bolt 88 Nm (65 lb. ft.)
Oil Pump Cover Screw 9 Nm (80 lb. in.)
Torsional Dampers-to-Crankshaft 95 Nm (70 lb. ft.)
Crankshaft Pulley-to-Torsional Damper Bolt 58 Nm (43 lb. ft.)
Connection Rod Cap Nut 60 Nm (44 lb. ft.)
Main Bearing Cap Bolt 105 Nm (77 lb. ft.)
Flywheel-to-Crankshaft Bolt 100 Nm (74 lb. ft.)
Camshaft Retainer Bolt 12 Nm (106 lb. in.)
Rear Crankshaft Seal Retainer Nut and Bolt 15 Nm (11 lb. ft.)
Oil Gallery Plug 13 Nm (115 lb. in.)
Upper Fuel Pump Cover Bolt 34 Nm (25 lb. ft.)
Lower Fuel Pump Cover Bolt 12 Nm (106 lb. in.)
Oil Filter Adapter Bolt 25 Nm (18 lb. ft.)
Coolant Drain Plug 21 Nm (15 lb. ft.)
Valve Cover Bolt 11 Nm (97 lb. in.)
Valve Lifter Retainer Bolt 20 Nm (15 lb. ft.)
Oil Level Indicator Tube Bracket Bolt 34 Nm (25 lb. ft.)
Engine Oil Cooler Retainer 23 Nm (17 lb. ft.)
Oil Pan Drain Plug 22 Nm (16 lb. ft.)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.