Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1992CAMARO V8-305 5.0L VIN EREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINESYSTEM SPECIFICATIONSENGINE SPECIFICATIONS
1992 Chevrolet Camaro V8-305 5.0L VIN E
Engine Specifications
1992 Chevrolet Camaro V8-305 5.0L VIN ESECTION Engine Specifications
Engine Specifications
Type V8
Displacement 5.0L (305 CID)
Bore 94.99 mm (3.740")
Stroke 88.39 mm (3.480")
Compression Ratio 9.1:1
Firing Order 1-8-4-3-6-5-7-2
Cylinder Bore Diameter ±0.050 mm (0.002")
Intake 5.94 mm (0.234")
Exhaust 6.53 mm (0.257")
Valve Lift
Intake 8.89 mm (0.350")
Exhaust 9.78 mm (0.385")
Spark Plugs
Type R45TS, or equivalent
Gap 0.89 mm (0.035")
Torque 15 Nm (11 lb. ft.)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.