Throttle Position Sensor

1992 Chevrolet Camaro V8-305 5.0L VIN ESECTION Throttle Position Sensor


COOLANT TEMPERATURE SENSOR (CTS)


100°C (212°F) 177 Ohms
90°C (194°F) 241 Ohms
80°C (176°F) 332 Ohms
70°C (158°F) 467 Ohms
60°C (140°F) 667 Ohms
50°C (122°F) 973 Ohms
40°C (104°F) 1459 Ohms
30°C (86°F) 2238 Ohms
20°C (68°F) 3520 Ohms
10°C (50°F) 5670 Ohms
0°C (32°F) 9420 Ohms
-10°C (14°F) 16180 Ohms
-20°C (-4°F) 28680 Ohms
-30°C (-22°F) 52700 Ohms
-40°C (-40°F) 100700 Ohms




MANIFOLD ABSOLUTE PRESSURE SENSOR (MAP)

KEY ON ENGINE OFF

1,000 to 2,000 Feet 3.6 to 5.2 Volts

2,000 to 3,000 Feet 3.5 to 5.1 Volts

3,000 to 4,000 Feet 3.3 to 5.0 Volts

4,000 to 5,000 Feet 3.2 to 4.8 Volts

5,000 to 6,000 Feet 3.0 to 4.6 Volts

6,000 to 7,000 Feet 2.9 to 4.5 Volts

7,000 to 8,000 Feet 2.8 to 4.3 Volts

8,000 to 9,000 Feet 2.6 to 4.2 Volts

9,000 to 10,000 Feet 2.5 to 4.0 Volts


NOTE:

Idle (Closed Throttle) 1.0 - 2.0 Volts
Wide Open Throttle (WOT) 4.0 - 4.8 Volts


INTAKE AIR OR MANIFOLD AIR TEMPERATURE SENSOR


210°F (100°C) 185 Ohms
160°F (70°C) 450 Ohms
100°F (38°C) 1800 Ohms
70°F (20°C) 3400 Ohms
40°F (4°C) 7500 Ohms
20°F (-7°C) 13,500 Ohms
0°F (-18°C) 25,000 Ohms
-40°F (-40°C) 100,700 Ohms




THROTTLE POSITION SENSOR



Voltage 0.95 max volts @ idle

The Throttle position Sensor is not adjustable on this engine but should read between 0.36 to 0.95 volts at closed throttle, and about 4.8 volts at wide open throttle.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.