Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1992CAMARO V8-305 5.0L VIN EREPAIR AND DIAGNOSISPOWERTRAIN MANAGEMENTCOMPUTERS AND CONTROL SYSTEMSTHROTTLE POSITION SENSORSERVICE AND REPAIRTHROTTLE POSITION SENSOR (TPS) REPLACEMENT
1992 Chevrolet Camaro V8-305 5.0L VIN E
Throttle Position Sensor (TPS) Replacement
1992 Chevrolet Camaro V8-305 5.0L VIN ESECTION Throttle Position Sensor (TPS) Replacement
Throttle Body Assembly (Typical):
1. Remove the air cleaner assembly and extension spacer.
2. Disconnect TPS electrical connector.
3. Remove two TPS attaching screws, lockwashers and retainers.
4. If equipped, remove screw attaching TPS actuator lever to end of throttle.
5. Remove TPS.
6. With throttle valve closed, install TPS. Line up TPS lever with TPS drive lever on throttle body.
7. Apply suitable thread locking compound to screw threads, then install retainers, lockwashers and screws. Adjust TPS, see ADJUSTMENT PROCEDURES.
8. Attach the TPS electrical connector, and reinstall air cleaner assembly.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.