Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1990SUBURBAN 1/2 TON 4WD V8-350 5.7LREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSDIFFERENTIAL ASSEMBLYSYSTEM SPECIFICATIONSFRONT AXLEFASTENER TIGHTENING SPECIFICATIONS
1990 Chevrolet Suburban 1/2 Ton 4WD V8-350 5.7L
Fastener Tightening Specifications
1990 Chevrolet Suburban 1/2 Ton 4WD V8-350 5.7LSECTION Fastener Tightening Specifications
K TRUCK FRONT AXLE
Actuator 22 Nm (16 ft. lbs.)
Axle Tube Bolts 40 Nm (30 ft. lbs.)
Carrier Case Bolts 47 Nm (35 ft. lbs.)
Drain And Fill Plugs 33 Nm (24 ft. lbs.)
Front Axle Switch 5 Nm (45 in. lbs.)
Ring Gear Bolts 120 Nm (88 ft. lbs.)
Seal Retaining Clamp 136 Nm (100 ft. lbs.)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.