System Specifications

1989 Chevrolet V 20 P/U 4WD V8-454 7.4LSECTION System Specifications
Throttle body to Intake manifold 16 Nm (12.0 lb-ft)
Fuel Meter Cover Assembly 3.0 Nm (28.0 lb-in)
Fuel Meter Body Assembly 4.0 Nm (30.0 lb-in)
Fuel Inlet Nut 40.0 Nm (30.0 lb-ft)
Fuel Outlet Nut 29.0 Nm (21.0 lb-ft)
Fuel Lines 23.0 Nm (17.0 lb-ft)
Throttle Position Sensor (TPS) Attaching Screws 2.0 Nm (18.0 lb-in)
Idle Air Control Valve (IAC) 3.2 Nm (28.0 lb-in)
Fuel Filter Union Nuts 26.0 Nm (20.0 lb-ft)

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.