Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1989SUBURBAN 1/2 TON 2WD V8-454 7.4LREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSCOMPRESSOR HVACSYSTEM SPECIFICATIONSTIGHTENING SPECIFICATIONSWITH HR-6 HE COMPRESSOR
1989 Chevrolet Suburban 1/2 Ton 2WD V8-454 7.4L
With HR-6 HE Compressor
1989 Chevrolet Suburban 1/2 Ton 2WD V8-454 7.4LSECTION With HR-6 HE Compressor
Shaft Nut 16 N.m (12 ft. lbs.)
Through Bolts 9 N.m (84 in. lbs.)
Pressure Relief Valve 9 N.m (84 in. lbs.)
Suction and Discharge Connector Bolt 24 N.m (18 ft. lbs.)
Through Bolts 9 N.m (84 in. lbs.)
Pressure Relief Valve 9 N.m (84 in. lbs.)
Suction and Discharge Connector Bolt 24 N.m (18 ft. lbs.)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.